ESSX RUMORS

[Bruce Caldwell]

We are still in business making ESSX Poles?

Many of you have heard rumors I closed up shop NO I did not,
We moved to a larger warehouse next door to the old address/ we are now at 7624 Pebble drive Fort Worth Texas 76118
1-877-367-3779. I have been spending allot of time with my Mother who is very ill to insure her time with me is quality time!
So I have not gone to as many meets or been online as much.
We have made some fantastic improvements in the ESSX POLE LINE. We provide a great CARBON Design in all our poles from 13' on up to 17'6" using fractual geometry in the carbon design! The spiral is directly atributed to the stiffness or sofness of the pole. If we split the carbon during the helical wrapping we get less stifness but still provide strength to the hoop.

In the smaller sizes you may see a Barber pole look in the helical wrap of a special CARBON that has the highest flexible properties of any Carbon made.
Some of our competitiorsa re saying the split or the way we do it is creating a weak spot! Grin not if they understaood fractual dynamic designs and patterns. The poles are tougher and will outlast any other brand carbon pole! IN fact I would say that our breakage has been reduced by 90 % less since we changed to fractual dynamics! Our Special Carbon is helical wrapped to provide a ratio of strength both to the whoop and to the stiffness of the pole. Making ESSX very light weight and the best pole to time with the vault of the athlete.


Many of you ask if Altius Paul's old company bought me out No they did not.Nor did Erickson poles the new company
I have entered into an agreement to work with Jeff Erickson of Altius where I share his building for the manufacturing of my poles with my equipment.
We have exchanged a little technology. I have agreed with Altius that their Cellophane wrapping of the pole does reduce cost and provide an improved product. This idea they use works well to keep moisture, wax and other contaminants out of the glass and provides a higher density Pole. So you may find that ESSX POLES have a similar finish to the Altius poles, However once you jump on the ESSX you will feel and know it is an ESSX pattern by the way it rolls over and responds to the timing of the vaulter!
Do not misunderstand this, Altius poles are good poles made with the very design they have been using for years.
In the beginning we bought glass from Altius at much lower cost and traveled to Jacksonville TX to pick up glass. Now we are building poles in Jacksonville Tx and we bring them back to Fort Worth to test them, measure them, apply our famous Flame to them for storage in our Fort Worth facility. You have seen ESSX poles before hanging from the ceiling right! we do this to keep the poles soft side and pre-bend in line!

WHY are ESSX POLE Better than other poles on the market?

1. Guaranteed indestructible pole tip with benefits of engineering design to actually help you jump higher!
2. A Smart Pole with a pattern to allow the pole to only bend in one direction, no twisting and in the same direction as the pre-bend of the pole!! The ESSX Pole will not bend low, to cause contact of the pole to the landing pit. the pole forces the vaulter to jump tall at the plant and the timing allows a swing with timing of a higher bend return force! Do not ask any competitor what this means they are still trying to figure out the NofZinger Grin!
3. Smart Xlogic technology to move from one size to another easily without the confusion of the elusive flex number!!
All poles are rated in 1 kilo increments or 2.2 lbs so you never get a pole size overlap!
4. Smart label to tell you what is the next pole to go to, the flex compared to other brands and what pole to step down to on bad weather conditions!
5. Packed in a PVC Tube to protect the pole during shipment! (a cost of $15.00 alone)

Why do we not see as many World Class Vaulters on ESSX?

We use to provide promotional poles, however most World class athlete are getting paid more than a pole company makes in a year.
I think if they want them they should pay for them under a promotional discount program! So far as long as the other manufactures wish to give away pole and many athletes have to cut them or just put up with them! Only the smart ones who wish to jump higher and consistent will jump on ESSX. Unless they can get the other manufacturers to build ESSX poles for them GRIN!! (a few have!)

In addition, to ESSX Vaulting poles we now carry ESSX Hurdles, ESSX starting blocks, ESSX Standards, ESSX Discus, and ESSX shots in stock at our new warehouse facility in Texas!
PLEASE PLACE YOUR ORDERS EARLY AS WE WILL BE STOCKING UP THIS NEXT SEASON WITH THE FULL LINE HANGING FROM OUR CEILING! AND EVEN THEN THE DEMAND CAUSES BACK ORDERS! (ORDER EARLY)!!!
http://www.officialessx.com/ for all six of our websites!
http://www.xlogicsports.com/ For ESSX POLES
http://www.essxtrack.com/home/ for other equipment
Toll Free Phone number is 1-877-367-3779
Bruce Caldwell